Arccaptain MIG205MP|The Best All-In-One(MIG,MMA,TIG,Clean,CUT) Welder&Cutter

Youtube Influencer Mad Ginger Customs tested and reviewed Arccaptain MIG205MP, the All-In-One Welder&Cutter.

Mad Ginger Customs unboxed the machine and discovered that, in addition to the torch supporting MIG, MMA, TIG, Clean, and CUT functions, a regulator was also included. He was very satisfied with the complete packaging!

After that, Mad Ginger Customs tested the machine's MIG, MMA, TIG, CLEAN, and CUT functions individually.

• MIG Weld

Mad Ginger Customs not only tested the regular MIG welding but also tested the Pulse MIG welding function. He was very satisfied with the MIG205MP's MIG capabilities.

• Stick Weld

Mad Ginger Customs tested the Stick Weld function using 7018 welding rods. Although he is not a Stick Welder, he still managed to produce high-quality welds.

• TIG Weld

Mad Ginger Customs also tested the TIG function, and he remained very satisfied with the performance of the MIG205MP.

• CLEAN

After TIG welding, there can be some discoloration, which is technically an oxidation reaction that can corrode the metal. However, using the CLEAN function of the MIG205MP with electrolytic fluid can remove these discolorations, better protecting the welded metal. It's important to note that because the electrolyte can produce toxic gases when it comes into contact with metal, this function must be used in a well-ventilated area.

• CUT

Mad Ginger Customs conducted cutting tests on a half-inch plate and was amazed by the versatility of the MIG205MP's cutting performance.

• Voice Reminder Function

Mad Ginger Customs believes that the voice reminder function provides a lot of convenience for newcomers in the welding field, as they often struggle to distinguish how to connect the positive and negative terminals and may not understand the instruction manual. With the voice reminder feature, users can clearly know how to connect the positive and negative terminals after selecting the mode. Additionally, the voice prompts will inform users if there is a short circuit situation.

• iControl Function

The iControl function is a Bluetooth feature that allows users to connect their smartphones to the welding machine, enabling remote control and data storage. This powerful functionality allows users to avoid unnecessary back-and-forth while adjusting welding parameters when welding underneath a vehicle.

Mad Ginger Customs is very satisfied with the Arccaptain MIG205MP and stated in their video that they will use this machine for future projects. They have always recognized the Arccaptain brand, believing that it offers a great balance between competitive pricing and product quality.